Abdolkhani, Ali
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Abdolkhani, Ali
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2014, Pages 732-741]
Afra, Elyas
Investigation on the effect of endoglucanase enzyme treatment time
and refining to improve OCC pulp properties [Volume 28, Issue 3, 2013, Pages 417-434]
Aghakhani, Mohammad
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013, Pages 301-312]
Agharafiei, Ebrahim
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Akbari, Hamed
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013, Pages 224-237]
Aliabadi, Misam
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Andalibian, Mohammad amin
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Ashori, Alireza
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Azad falah, Mohammad
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Azad fallah, Mohammad
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Azadifar, Masoud
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
B
Baghbani, Razieh
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Bagheri, Amir
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Bazyar, Behzad
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013, Pages 224-237]
Bazyar, Behzad
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Bazyar, Behzad
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Behravesh, Amir hossein
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2014, Pages 597-607]
Behzadi, Farahnaz
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Biprva, Porya
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2014, Pages 763-773]
Brazandeh, Mohammad Mehdi
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
D
Dalvand, Mosayeb
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Dehghani firoz abadi, Mohammadreza
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Dehghani firoz abadi, Mohammad reza
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
E
Ebrahimi, Ghanbar
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Ebrahimi, Zahra
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Ebrahimpour Kasmani, Jafar
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013, Pages 1-10]
Ebrahimzadeh, Mohammad Ali
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013, Pages 522-533]
Elyasi, Abdolah
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2014, Pages 597-607]
Eshagi, Saeid
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Eshghi, Ayob
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
F
Fakhryan, Abas
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Fakhryan, Abas
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2014, Pages 685-690]
Farajpoor Roodsari, Arash
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013, Pages 561-582]
Farajpour Roudsari, Arash
Comparative study of chemical components and morphological features
of trunk and cone fibers from loblolly pine grown in Gilan province [Volume 28, Issue 3, 2013, Pages 545-560]
Farsi, Ramin
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013, Pages 476-488]
Fazeli, Faezeh
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Frozan, Zinab
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
G
Ghasemi, esmaeil
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Ghasemi, Esmaeil
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Ghasemi, Esmaeil
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Ghasemi, Hanieh
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Ghasemian, Ali
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Ghasemiyan, Ali
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Ghaznavi, Mohammad reza
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013, Pages 89-96]
Ghlamian, Hadi
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Ghofrani, Mohammad
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2014, Pages 720-731]
Gholipour, taherh
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2014, Pages 628-641]
Gholipour, Taherh
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Ghorbani, Maryam
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2014, Pages 763-773]
Golbabaei, Fardad
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013, Pages 381-391]
Golbabaei, Fardad
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Golbabaei, Fardad
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
H
Habibi, Masoud reza
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2014, Pages 642-653]
Haghighi, Azar
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013, Pages 252-265]
Hajihassani, Reza
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Hamzeh, Yahya
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Hamzeh, Yahya
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Hemmasi, Amir houman
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Hezbi, Nazbakht
Investigation on the effect of endoglucanase enzyme treatment time
and refining to improve OCC pulp properties [Volume 28, Issue 3, 2013, Pages 417-434]
HojatiMarvast, Ebrahim
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2014, Pages 732-741]
Hosseini hashemi, seid khalil
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Hosseinkhani, Hossein
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013, Pages 195-204]
Hosseinkhani, Hossein
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Hosseinzadeh, Sarveh
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2014, Pages 763-773]
J
Jahan Latibari, Ahmad
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Jahan Latibari, Ahmad
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Jahan - Latibari, Ahmad
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Jahan-Latibari, Ahmad
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Jodi, Hamid
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
K
Kalagar, Mehdei
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Karegarfard, Abolfazl
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Karegarfard, Abolfazl
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Karegarfard, Abolfazl
Investigation on the effect of press temperature and time on physical and
mechanical properties corn stalk MDF [Volume 28, SPRING 1, 2013, Pages 97-108]
Karegarfard, Abolfazl
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Karegarfard, Abolfazl
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Karegarfard, Abolfazl
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Kargarfard, Abolfazl
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013, Pages 381-391]
Kargarfard, Abolfazl
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2014, Pages 628-641]
Karimi, Alinaghi
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2014, Pages 732-741]
Karimi, Ali nagi
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013, Pages 252-265]
Kermanian, Hossein
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Kermanian, Hossein
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Kermanian, Hossein
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Khademi eslam, Habib alah
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Khademi eslam, Habib alah
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013, Pages 169-181]
Khakifirooz, Alireza
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Kohantorabi, Mostafa
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013, Pages 238-257]
L
Lashgari, Amir
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013, Pages 463-475]
Lashgari, Amir
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Lashgari, Amir
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Layeghi, Mohammad
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
M
Madhoshi, Mehrab
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013, Pages 301-312]
Madhoshi, Mehrab
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Mahdavi, Saeid
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Mahdavi, Saeid
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Mahdavi, Saeid
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Mahdavi, Saeid
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2014, Pages 642-653]
Maleki Gholandoz, Mostafa
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Marzban Moridani, Elham
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Mashkour, Mozhdeh
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013, Pages 405-416]
Masoudifar, Masieh
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Masoudifar, Masih
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Mastari frahani, Mohammad reza
Effect of Paulownia wood particles addition and press time on particleboard
surface quality [Volume 28, Issue 4, 2014, Pages 672-684]
Matini behzad, Hamed
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013, Pages 123-133]
Mehrabi, Saeid
The use of X-ray method to study annual growth variation
of Pinus eldarica [Volume 28, Summer 2, 2013, Pages 341-353]
Mirshokraee, Ahmad
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013, Pages 476-488]
Mollahassani, Amir
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Moradyan Gilan, kezhal
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
N
Nasiri, Milad
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Nazari, Salehe
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013, Pages 522-533]
Nazarnezhad, Noraldin
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013, Pages 522-533]
Nazeri, Amir mohssen
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013, Pages 1-10]
Nazeri, Amir Mohssen
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Nikbin, Negin
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Nourbakgsh, Amir
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013, Pages 435-450]
Nourbakhsh, Amir
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Nourbakhsh, Amir
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013, Pages 381-391]
O
Oladi, Reza
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Oromiehie, Abdolrasool
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
P
Pesaraklu, Ali
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Pesarklo, Mohammad reza
Effect of Paulownia wood particles addition and press time on particleboard
surface quality [Volume 28, Issue 4, 2014, Pages 672-684]
Pishan, Sakineh
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2014, Pages 720-731]
Pourhooshyar Ziabari, Kamrava
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
Pourmosa, Shadman
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Pourmousa, Shadman
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Pourmousa, Shadman
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013, Pages 489-497]
R
Ramazani, Omid
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Ramezani, Omid
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013, Pages 354-363]
Ramezani, Omid
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013, Pages 77-88]
Ramezani, Shima
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Rangavar, Hossein
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013, Pages 224-237]
Rangavar, Hossein
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Rangavar, Hossein
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2014, Pages 628-641]
Raofkia, Komail
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Rashidi joibari, Iman
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Rashnv, Arash
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013, Pages 583-896]
Rassam, Ghoncheh
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2014, Pages 608-627]
Resalatii, Hossein
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013, Pages 24-34]
Rohnia, Mehran
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013, Pages 238-257]
Rohnia, Mehran
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Rohnia, Mehran
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013, Pages 89-96]
Roohnia, Mehran
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
S
Safarpour, Arsalan
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013, Pages 35-47]
Safdari, vahid reza
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013, Pages 62-71]
Safdari, Vahid reza
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Safdari, Vahid reza
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Safdari, Vahid Reza
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Samariha, Ahmad
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013, Pages 1-10]
Saraeian, Ahmad reza
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013, Pages 405-416]
Saraeian, Ahmad reza
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Saraeian, Ahmad Reza
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Sepahvand, ُSima
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013, Pages 266-276]
Sepehr, Amir
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Sepidehdam, Sead Javad
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013, Pages 451-462]
Shabanalizadeh, ّFahimeh
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013, Pages 48-61]
Shakeri, َAbdolah
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013, Pages 290-300]
Shayghani akmal, Amir abbas
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013, Pages 329-340]
Shiyarkar, Iraj
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013, Pages 561-582]
Sobhani, Babak
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
T
Tabarsa, Taghi
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013, Pages 313-328]
Tabarsa, Taghi
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2014, Pages 742-754]
Tabarsa, Tagi
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013, Pages 266-276]
Tabarsa, Tagi
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013, Pages 277-289]
Tabeai, Asghar
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Tabei, Asghar
Comparative study of chemical components and morphological features
of trunk and cone fibers from loblolly pine grown in Gilan province [Volume 28, Issue 3, 2013, Pages 545-560]
Tabei, Asghar
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013, Pages 561-582]
Taghadosi, Amir hossein
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Taghiyari, Hamid reza
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013, Pages 252-265]
Tajadini, Azhang
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2014, Pages 709-719]
Tajdini, Azhang
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013, Pages 205-223]
Tajdini, Azhang
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Tajedini, Ajang
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2014, Pages 654-671]
Tajedini, Ajang
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2014, Pages 691-708]
Tajvidi, Mehdi
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013, Pages 11-24]
Tajvidi, Mehdi
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2014, Pages 597-607]
Talaei, Aysona
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2014, Pages 720-731]
Talaeipoor, Mohammad
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Talaeipoor, Mohammad
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013, Pages 182-193]
Talaeipour, Mohammad
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013, Pages 509-521]
Tamjidi, Abas
Investigation on the utilization of urban wood residues in the
production of particleboard [Volume 28, SPRING 1, 2013, Pages 109-122]
Taremian, Asghar
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013, Pages 123-133]
Taremian, Asghar
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013, Pages 498-508]
Tavakkoli, Amir
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013, Pages 134-152]
Torkaman, Javad
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013, Pages 393-404]
V
Vaysi, Ramin
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2014, Pages 755-762]
Y
Yadollahi, Rahim
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013, Pages 489-497]
Yaghmaeipour, Abdolsaber
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013, Pages 89-96]
Yahyavidizaj, Mostafa
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013, Pages 277-289]
Yoosefnia, Zahra
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013, Pages 153-168]
Z
Zabihzadeh, Majid
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013, Pages 534-544]
Zahedi, Misam
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2014, Pages 742-754]
Zhand, Soodeh
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013, Pages 366-380]
Zhand, Soodeh
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2014, Pages 774-794]
Ziaee Khosro Shahi, Saeid
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013, Pages 266-276]
